CP-27 CNC is the NC upgrade from the CP-27EVS High prefromance finish lathe. It's keep the original machine's durabllity and elegant exerior while automating it with servos and CNC control. CP-27CNC Gang-Type CNC toolroom lathes which comes with FANUC controller(standard) or the other controller and has gang-type tooling and linear motion guides that enables you to get the job done faster.
TOOLING HOLDER AND OPTIONAL EQUIPMENT FOR CYCLEMATIC HIGH SPEED. HIGH ACCURACY TOOLROOM LATHES
Power Collet Closer
Quick Change Adjustable Holder
Drill Chuck Holder
Releasing Die Nut Holder
Adjustable Rotary Stops
Tool Holder Extension
Extended Square Shank Tool Holder
Square Shank Tool Holder, Right Hand
Square Shank Tool Holder, Left Handn
Round Shank Tool Holder, 3 Position
Round Shank Tool Holder, 6 Position
ER Collet Holder
OPTIONAL ACCESSORIES
A wide variety of optional accessories are shown in the separate accessories catalogue.
Samples of Matal and Non-Metal Machining
FEATURES
127 mm (5") swing over bed
27 mm (1 1/16") 5C collet capacity.
Fast lever collet chucking or air closer.
Preloaded angular contact ball bearing spindle.
Spindle speeds 50~6000 RPM.
Quick change spindle speeds
1 HP frequency controlled motor
Tooling center height 12 mm
SPECIFICATIONS
MODEL
CP-27CNC
With Round 5C Collets
27 mm (1 1/16")
With Hexagon 5C Collets
22 mm (7/8")
With Square 5C Collets
19 mm (3/4")
With Step Chuck
27 ~ 127 mm (1 1/16" ~ 5")
Spindle Nose Diameter
Ø55.5 mm
Spindle Nose I.D./O.D.
5C (10°)/4° Taper
Spindle Speeds (Variable)
50 ~ 6000 RPM
Spindle Motor
1HP
Hole Through Spindle
31.75 mm (1 1/4")
Bar Stock Diameter (5C Collet)
Ø27 mm (Ø1 1/16")
Distance Between Centers
No tailstock
Swing Over Bed
127 mm
Compound Slide Travel
Optional X:230 mm Z:100 mm
Coolant Pump
Optional
Tailstock Spindle Taper
No tailstock
Net Weight (Approx)
400 kg (880 1bs.)
Gros Weight (Approx)
500 kg (1100 1bs.)
Machine Dimensions (L x W x H)
1200x1000x1900 mm(47"x40"x75")
All dimensions, specifications and machine appearance are subject to change without prior notice.
Outstand Features
Precision ball screw on X, Z-axes
Linear motion guides on X, Z-axes
X, Z-axis feed is driven by a AC servo motor.
X, Z-axis ball screws directly coupled to AC servo motor, minimizing backlash.
Fast lever collet chucking with a single movement.
Power collet closer is optional.
The spindle is mounted in high precision preloaded angular contact ball bearings eliminating radial and end play.
A wide variety of optional accessories to increase versatility of the machine.
CONVENIENT TOOL SLIDE CHANGE
Tool slide change is quickly accomplished by changing the entire unit. When tool slide is changed, the operator needs only to set up the first tool.
POWER COLLET CLOSER (OPTIONAL)
When requested, the lathe can be fitted with a easy type power collet closer to replace manual lever operation . This air operated collet closer features automatic chucking for upgrading working efficiency.
GANG TYPE TOOL SLIDE
3/8" (9.525mm) & 1/2" (12.7mm) center height is optional.
Specify 12mm
The tool slide has a T-slot for easy mounting of tool holders, which accommodate standard 12mm tool center height. 3/8" (9.525mm) & 1/2" (12.7mm) center height is optional.
1 HOLE DRILL AND SHANK HOLDER
2 HOLE DRILL AND SHANK HOLDER
3 HOLE DRILL AND SHANK HOLDER
8 HOLE DRILL AND SHANK HOLDER
6 HOLE DRILL AND SHANK HOLDER
CENTER ADJUSTABLE TOOL HOLDER
DRILL AND SHANK HOLDER
(RIGHT HAND)
DRILL AND
SHANK HOLDER
(LEFT HAND)
EXTENSION TOOL HOLDER A":1",2",3",4"
TAP HOLDER
SQUARE HOLDER (RIGHT HAND or
LEFT HAND)
Quick Navigator Menu: (Right-Click again to close this menu.)
standard 12mm tool center height. 3/8" (9.525mm) & 1/2" (12.7mm) center height is optional.
