CNC Toolroom Lathe CT-1118CNC

Center Turning Also Gang Turning On New CT-1118CNC

CT-1118CNC is the NC upgrade from CTL-618EVS manual toolroom lathe. It keeps the original machine¡¦s durability and elegant exterior while automating it with servos and CNC control. With CT-1118CNC's 2008 redesign, we go even further, the ability to use tailstock and lathe center to perform shaft work is maintained, but more importantly an innovative tool plate design adds the capability to remove the compound tool post and swap in T-slot gang tool slide in its place. The gang tool slide great work with a new complete line-up of tool holders from CYCLEMATIC for gang tool turning. Either traditional lathe tooling setup or gangtool setup are easy to swap out and exchange for the other. Now CT-1118CNC is the ONE CNC toolroom lathe that can bring you TWO different styles of machining capability.

This Setup Shows The Lathe With
Bare cross slide with precision locator holes for custom applications	Quick-change tool holder on "shory" gang tool plate
Single tool on quick-change tool holder on compound tool slide Single tool holder in the back	Lathe canter in tailstock Single tool on quick-change tool holder on compound tool slide
One full-length gang tool plate with T-slots to accommodate different kinds of tool holders	Two "shorty" gang tool plates leaves roon in the middle for long shaft work with the tailstock
Multiple "single" gang tool plates each holding a single tool holder

Gang Tooling Now Available on CT-1118CNC Toolroom Lathe

There is now one more way to place cutting tools on the CT-1118CNC CNC Toolroom Lathe. Gang tooling makes it easier to setup jobs where multiple tool changes are necessary. It's suitable for higher volume production of the kind of high precision parts toolroom lathes are known for.

Expanding Collet	Vacuum Chuck	Hydraulic Chuck	Chuck Back Plate	6" 3-jaw Chuck
Lathe Dog	Face Plate	Pneumatic Chuck	Precision Diaphragm Chucks	Step Chuck

Tool Plate for Quick Change Toolpost	ER Collet Holder	Square Shank Tool Holder, Right Hand	Gang Tool Block 408 mm	Gang Tool Block 96 mm	Gang Tool Block 48 mm
Square Shank Tool Holder, Left Hand	Square Shank Tool Holder, Right Hand	Square Shank Tool Holder, 1 Position	Drill Holder, Adjustable Center	Releasing Die Nut Holder	Tap Holder

Samples of Matal and Non-Metal Machining

Optional Accessoreis
A wide variety of optional accessories are shown in the separate accessories catalogue.

	MASSIVE SADDLE The saddle slideways are coated with Turcite-B for maximum wear resistance. The cross slideways have hardened and ground tool steel inserts for smooth accurate movement.
	Solid one-piece enclosed headstock has high precision preloaded ball bearing spindle with 5C collet capacity. High-precision preloaded ball bearing spindle is mounted in the solid one-piece enclosed headstock, providing maximum rigidity and sustained precision. The collet seats directly in the hardened and precision ground spindle, eliminating troublesome sleeves and adapters that introduce costly inaccuracies.
	The fast lever collet closer provides faster chucking. The lever control end of the closer assembly is balanced and rides on a precision bearing. Collet tension is instantly adjustable throughout the full range from light to heavy holding power without the use of tools. The spindle handwheel is built into the end of the spindle. Entire collet closer is conveniently removed by pulling up the lock pin.
	POWER COLLET CLOSER (OPTIONAL) When requested, the lathe can be fitted with a easy type power collet closer to replace manual lever operation, this air operated collet closer features automatic chucking.
	The solid full bearing tailstock supports any load to the preloaded ball bearing spindle headstock, The tailstock has 95mm(3-3/4") travel. The spindle is graduated in inch and metric for easy reading. Standard shank 2 morse taper tools are automatically discharged for easy operation.
	STEP CHUCKS are exceptionally useful for accurately holding work up to 6" in diameter. Castings, moldings, stampings and machined parts are held rigidly and accurately Tubing can be held without crushing or distorting. STEP CHUCKS AND CLOSERS are carried in stock in 2", 3", 4", 5" and 6" rated sizes. All step chucks are supplied with pin holes in place for precision machining. CHUCK CLOSERS fit directly to the machine spindle. A taper corresponding to that on the periphery of the step chuck places the closing pressure over the stepped area of the chuck, resulting in greater gripping power and accuracy.

CT-1118CNC

Relative Product :

• HOME > Toolroom Lathe > CNC Toolroom Lathe CT-606CNC
• HOME > Toolroom Lathe > CNC Toolroom Lathe CP-27CNC
• HOME > Toolroom Lathe > Toolroom Lathe CTL-618e
• HOME > Toolroom Lathe > Toolroom Lathe CTL-618EVS
• HOME > Toolroom Lathe > Toolroom Lathe CHR-68e
• HOME > Toolroom Lathe > Toolroom Lathe CTS-27EVS
• HOME > Toolroom Lathe > Toolroom Lathe CTL-27EVS
• HOME > Toolroom Lathe > Toolroom Lathe CP-27EVS