CT-606CNC Gang-Type CNC toolroom lathes which comes with FANUC or Anilam Control and has gang-type tooling and linear motion guides that enables you to get the job done faster.
SPINDLE TOOLING, TOOLING HOLDER AND OPTIONAL EQUIPMENT FOR CYCLEMATIC HIGH SPEED. HIGH ACCURACY TOOLROOM LATHES
Expanding Collet
Vacuum Chuck
Hydraulic Chuck
Chuck Back Plate
6" 3-jaw Chuck
Lathe Dog
Face Plate
Pneumatic Chuck
Precision Diaphragm Chucks
Step Chuck
Power Collet Closer
Quick Change Adjustable Holder
Drill Chuck Holder
Releasing Die Nut Holder
Adjustable Rotary Stops
Tool Holder Extension
Extended Square Shank Tool Holder
Square Shank Tool Holder, Right Hand
Square Shank Tool Holder, Left Handn
Round Shank Tool Holder, 3 Position
Round Shank Tool Holder, 6 Position
ER Collet Holder
Optional Accessoreis:
A wide variety of optional accessories
are shown in the separate accessories catalogue.
Samples of Matal and Non-Metal Machining
SPECIFICATIONS
MODEL
CT-606CNC
Maximum Swing
200 mm
Maximum Turning Diameter
Ø150 mm (Ø6")
Distance Between Centers
No tailstock
Bar stock Diameter (5C collet)
Ø27 mm (Ø1-1/16")
Hole Through Spindle
Ø31.75 mm (Ø1-1/4")
CNC Controller
FANUC (STANDARD)
Spindle speeds (Variable)
50~4000 R.P.M. (3HP)
50~6000 R.P.M. (5HP)
Spindle Nose I.D./O.D.
5C (10¢X) / 4¢XX Tapern
5C (10¢X) / Ø55.5mm-10TPI
Chuck Diameter
Ø150mm( Ø6")
Maximum X-axis Travel
200 mm
Maximum Z-axis Travel
150 mm
Rapid Traverse
20 M/min
Inverter Spindle Motor
3 HP
5HP
X,Z-Axis Servo Motor
X : ß2 / Z : ß2
Coolant Pump
1/4 HP
Tailstock Spindle Taper
No tailstock
Tailstock Spindle Travel
No tailstock
Machine Dimensions (L x W x H)
2050x1000x1650 mm(81"x40"x65")
Machine weight
1100kgs (2400 lbs.)
Outstanding Features:
Precision ball screw on X, Z-axes
Linear motion guides on X, Z-axes
Steel telescopic way guards on Z-axis provide better protection.
X, Z-axis feed is driven by a AC servo motor.
X, Z-axis ball screws directly coupled to AC servo motor, minimizing backlash.
Fast lever collet chucking with a single movement.
Power collet closer is optional.
The spindle is mounted in high precision preloaded angular contact ball bearings eliminating radial and end play.
A wide variety of optional accessories to increase versatility of the machine.
Powerful 3 HP motor (5HP-Optional) with Yaskawa current vector inverter drive for improved torque response at low end.
CONVENIENT TOOL SLIDE CHANGE
Tool slide change is quickly accomplished by changing the entire unit. When tool slide is changed, the operator needs only to set up the first tool.
POWER COLLET CLOSER (OPTIONAL)
When requested, the lathe can be fitted with a easy type power collet closer to replace manual lever operation . This air operated collet closer features automatic chucking for upgrading working efficiency.
GANG TYPE TOOL SLIDE
3/8" (9.525mm) & 1/2" (12.7mm) center height is optional.
3/8" (9.525mm) & 1/2" (12.7mm) center height is optional.
The tool slide has a T-slot for easy mounting of tool holders, which accommodate standard 12mm tool center height. 3/8" (9.525mm) & 1/2" (12.7mm) center height is optional.
