Toolroom Lathe CTL-618EVS

HOME > Toolroom Lathe > Toolroom Lathe CTL-618EVS

Toolroom Lathe CTL-618EVS


 

SPINDLE TOOLING, TOOLING HOLDER AND OPTIONAL EQUIPMENT FOR CYCLEMATIC HIGH SPEED. HIGH ACCURACY TOOLROOM LATHES
Expanding Collet
Vacuum Chuck
Hydraulic Chuck
Chuck Back Plate
6" 3-jaw Chuck
Lathe Dog
Face Plate
Pneumatic Chuck
Precision Diaphragm
Chucks
Step Chuck

 

Four Station Turret
Step Chuck
Follow Rest
Steady Rest
Vertical Cut-off Slide
Quick Change Tool
Double Tool
Cross Slide
Radius Turning
Attachment
Taper Turning
Attachment
Rear Tool Holder Slide
Assembly

 

 

Optional Accessoreis:
A wide variety of optional accessories are shown in the separate accessories catalogue.
Features:
  • 280mm (11") Swing over bed.
  • 457mm (18") Distance between centers.
  • Dual range Inch/Metric quick change gearbox.
  • Infinitely variable spindle speeds from 0-4000 RPM
  • Full bearing carriage with Turcite-B slideway bearing material between carriage and bed.
  • The spindle is mounted in high precision preloaded angular contact ball bearings eliminating radial and end play.
  • Fast lever collet chucking with a single movement.
  • Independent infinitely variable feeds produce accurate cuts with efficient chip removal, and smooth surface finish.
  • Quick change gear box for easy precision threading.
  • Automatic thread length control with fine adjustable stops provides for accurate threading without thread relief.
  • Quick-action tool post slide for threading is instantly cleared from the work for a carriage return.
  • Quick-action tool post slide for threading is instantly cleared from the work for a carriage return.

 

Control Panel:
Electronic vari-speed system with inverter infinitely variable spindle speeds can be instantly set from 0 to 4000 RPM while the spindle is running. The actual rpm is viewed in an easy to read digital display enclosed in the speed control unit.

Dual range Inch/Metric quick change gearbox.

SPECIFICATIONS
MODEL
CTL-618EVS
Spindle Capacity With Chuck 150 mm(6")
With Expanding Collets 76 mm (3" )
With Round 5C Collets 27 mm (1-1/16")
With Hexagon 5C Collets 22mm (7/8") 
With Square 5C Collets 19mm (3/4" )
With Step Chucks 27 ~ 152mm(1-1/16-6")
Spindle Nose Diameter Ø55.5mm
Spindle Nose I.D/O.D 5C (10¢X)  /  4¢X Tapern
Spindle Speeds (Variable) 50-4,000 rpm (5C) /50-3,000 rpm ( with 6" 3-jaw chuck)
Inverter Spindle Motor 3 HP
Hole Through Spindle 31.75mm (1-1/4")
Bar stock diameter (5C collet) Ø27 mm (Ø1-1/16")
Distance Between Centers 457 mm
Swing Over Bed 280 mm
Swing Over Carriage 230 mm
Swing Over Cross Slide 152 mm
Carriage Power Feed Range (Variable) 5~102 mm/min
Cross Slide Power Feed Range (Variable) 8~178 mm/min
Cross Slide Travel 152 mm
Quick-action Compound Slide Travel 2.5 mm
Compound Slide Travel 76 mm
Coolant Pump 1/8HP, 220V, 3PH
Feed Inberter Motor 1/2 HP
Tailstock Spindle Travel 95 mm
Range of Threads 0.2~6.35 mm (120~4TPI)
Net Weight (Approx) 1000 kgs ( 2200 lbs.)
Gross Weight (Approx) 1050 kgs ( 2310 lbs.)
Machine Dimensions (LxWxH) 1850x750x1700 mm (73"x30"x67")
All dimensions, specifications and machine appearance are subject to change without prior notice.