Fully enclosed preloaded angular contact ball bearing headstock with splash shield for spindle
Fast lever collet chucking with a single movement.
Specially designed bed ways are made of hardened and ground alloy tool steel that resist wear. The angular guide ways allow chips to fall in the oil pan.
Specially designed bed ways are made of hardened and ground alloy tool steel that resist wear. The angular guide ways allow chips to fall in the oil pan.
The double tools cross slide is held securely to the bed by a mating dovetail section and may be locked in any position on the bed.
The preloaded ball bearing turret head eliminates all play between the turret head and the turret slide.
The sliding ball bearing collet tray provides space for one set of collets and is within easy reach of operator.
High / Low speed quick change level for Convenience.
SPECIAL REQUEST FOR CUSTOMER :
"Old School" Design for 2008
This is an automated lathe made on special request for a customer by combining CTS-27EVS with hydraulic actuators.
CTS-27EVS has double tool cross slide and 6-station turret for high production use.
The hydraulics are used to actuate the turret indexing motion, tool feed as well as cross slide motions.
The sequence of motions performed is regulated by a cam/micoprocessor.
Easy to set up. Easy to maintain.
SPECIFICATIONS
MODEL
CTS-27EVS
Spindle Capacity
With Chuck
150 mm(6")
With Expanding Collets
76 mm (3" )
With Round 5C Collets
27 mm (1-1/16")
With Hexagon 5C Collets
22 mm (7/8")
With Square 5C Collets
19 mm (3/4" )
With Step Chucks
27 ~ 152mm(1-1/16-6")
Spindle Nose Diameter
Ø55.5 mm
Spindle Nose I.D/O.D
5C (10¢X) / 4¢X Tapern
Spindle Speeds (Variable)
50-4000 R.P.M.
Inverter Spindle Motor
3 HP
Hole Through Spindle
31.75mm (1-1/4")
Bar stock diameter (5C collet)
Ø27 mm (Ø1-1/16")
Distance Between Centers
380 mm (CTL-27EVS)
Swing Over Bed
229 mm
Swing Over Carriage
-
Swing Over Cross Slide
-
Carriage Power Feed Range (Variable)
-
Cross Slide Power Feed Range (Variable)
-
Cross Slide Travel
95 mm
Quick-action Compound Slide Travel
-
Compound Slide Travel
X :114 mm
Z :140 mm
Coolant Pump
1/8HP, 220V, 3PH
Feed Inberter Motor
-
Tailstock Spindle Travel
95 mm
Range of Threads
-
Net Weight (Approx)
450 kgs ( 990 lbs.)
Gross Weight (Approx)
620 kgs ( 1364 lbs.)
Machine Dimensions (LxWxH)
1750x700x1600 mm (69"x28"x63")
All dimensions, specifications and machine appearance are subject to change without prior notice.
SPINDLE TOOLING, TOOLING HOLDER AND OPTIONAL EQUIPMENT FOR CYCLEMATIC HIGH SPEED. HIGH ACCURACY TOOLROOM LATHES
Expanding Collet
Vacuum Chuck
Hydraulic Chuck
Chuck Back Plate
6" 3-jaw Chuck
Lathe Dog
Face Plate
Pneumatic Chuck
Precision Diaphragm
Chucks
Step Chuck
Straight and Taper Turning Slide for Double Tool Cross Slide
Quick Change Adjustable Tool Holder
Quick Acting Recessing Tool
Knee Tool
Slide Tool
Boring Tool Holder
Centering and Facing Tool
Releasing Tap Holder
Tool Holder Extension
Adjustable Rotary Stops
Adjustable Tool Holder
Releasing Tap Holder
Optional Accessoreis:
A wide variety of optional accessories
are shown in the separate accessories catalogue.